TB 9-2320-280-35-11
35-36. Route NTDR power cable (64) and lower SINCGARS power cable (65) from battery box (1) through
hole (63) in frame (62).
35-37. Route EPLRS power cable (58) and upper SINCGARS power cable (59) over frame and behind
multi-net rack (66). Secure cables (58) and (59) with loop clamp (60) and self-tapping screw (61).
35-38. Locate, mark, and drill one 0.390-in. diameter hole (68) in body (67) of vehicle and battery box (1).
35-39. Install shunt ground cable (80) on body (67) with screw (79), lockwasher (69), nut (70), washer (71),
and wingnut (72).
35-40. Route ground cable (80) to shunt (11).
35-41. Route cable (78) from shunt (11) to rear battery. Secure cables (78) and (80) with screw (79).
35-42. Route cable (81) from shunt (11) to terminal block. Secure cables (81) and (32) to shunt (11) with
screw (82).
35-43. Route cable (83) from solenoid (19) to
negative terminal.
35-44. Route cable (77) from solenoid (19) to rear battery. Secure cables (77) and (83) to solenoid (19) with
nut (76).
35-45. Secure cable (31) to
solenoid (19) with
washer (73) and nut (74).
35-46. Route cable (84) from solenoid (19) to
negative terminal.
35-47. Secure cable (84) to solenoid (19) with nut (75).
58
66
59
60
65
64
63
61
1
62
58.
EPLRS POWER CABLE A3004939 QTY. 1
59.
UPPER SINCGARS POWER CABLE A3014039-2 QTY. 1
60.
LOOP CLAMP MS21333-75 QTY. 1
61.
SELF-TAPPING SCREW 9421073 QTY. 1
64.
POWER CABLE (NTDR) 8174912-2 QTY. 1
65.
LOWER SINCGARS POWER CABLE A3014039-2 QTY. 1
Figure 5-124.
5-94