TB 9-2320-280-35-12
27-10. Install upper half of antenna offset mount (15) on lower half of antenna mount (2) with four
screws (16), eight washers (5), four lockwashers (4), and four nuts (3).
NOTE
Ensure holes in antenna base and grommet are aligned with
weldnut holes in mounting bracket.
27-11. Install antenna (22) and gasket (21) on
top of
antenna offset mount (15) with four screws (14),
NOTE
Prior to securing antenna ground lead, enlarge hole on offset
mount with 9/32-in. drill bit to allow 1/4-in. screw to fit.
27-12. Secure antenna ground lead (19) to lower half of antenna mount (2) with screw (17), two
lockwashers (18), and nut (20).
14
24
23
22
15
21
16
5
20
17
18
19
18
5
4
3
3.
NUT MS35690-610 QTY. 4
4.
LOCKWASHER MS35338-141 QTY. 4
5.
WASHER MS15795-814 QTY. 8
2
14.
CAPSCREW MS35307-365 QTY. 4
15.
OFFSET MOUNT A3046219 QTY. 1
16.
SCREW MS90725-62 QTY. 4
17.
SCREW MS35207-263 QTY. 1
18.
LOCKWASHER MS45904-68 QTY. 2
20.
NUT MS35650-302 QTY. 1
21.
GASKET A3013655-1 QTY. 1
22.
23.
WASHER 2436163 QTY. 4
24.
LOCKWASHER MS45904-72 QTY. 4
Figure 5-70.