TB 9-2320-280-35-12
Section XLVI. PASSENGER-SIDE MULTI-NET RACK CABLE INSTALLATION
46-1. Locate, mark, and drill two 0.281-in. diameter holes (12) in multi-net rack (3).
46-2. Locate, mark, and drill two 0.281-in. diameter holes (13) in multi-net rack (3).
46-3. Connect battery alarm box power cable (10) to battery alarm box (9).
46-4. Route battery alarm box power cable (10) along multi-net rack (3) lower shelf to curbside footwell.
46-5. Secure battery alarm box power cable (10) with
two clamps (11), screws (5), lockwashers (4), and
nuts (8).
46-6. Route EPLRS antenna cable (1) and INC-EPUU
cable (2) along underside of
multi-net rack (3)
upper shelf.
46-7. Secure EPLRS antenna cable (1) and INC-EPUU
cable (2) to
multi-net rack (3) with
five clamps (7),
5
6
3
4
7
2
8
9
8
1
10
7
5
7.5
5
4
12
4
2.5
11
1.125
13
8
4.
LOCKWASHER MS45904-68 QTY. 7
5.
SCREW MS90725-6 QTY. 7
7.
LOOP CLAMP 3225T48 QTY. 5
8.
NUT MS51967-2 QTY. 7
10.
BATTERY ALARM BOX CABLE A3265596 QTY. 1
11.
LOOP CLAMP MS21333-102 QTY. 2
Figure 5-133.