TB 9-2320-280-35-10
7-16. Secure three 24V fuse wire assemblies (25) and one 12V fuse wire assembly (3) to B-beam (22) with
four self-tapping screws (36).
NOTE
For models equipped with power stud, perform step 7-17.
Otherwise, proceed to step 7-18.
7-17. Secure 24V terminal board power wire terminal lug (28) to power stud (40) with lockwasher (38)
and existing nut (39).
7-18. Secure 24V terminal board power wire terminal lug (28) to terminal board (37) with lockwasher (38)
and existing nut (39).
7-19. Install decal (35) on B-beam (22).
7-20. If previously removed, install right-hand rear fixed door. (Refer to TM 9-2320-280-20.)
7-21. Install batteries. (Refer to TM 9-2320-280-20.)
22
25
~
35
3
36
28
37
28
40
38
39
39
38
35. DECAL 12339060 QTY. 1
36. SELF-TAPPING SCREW 12342499-2 QTY. 4
38. LOCKWASHER MS35338-48 QTY. 1
Figure 5-13.
5-10
