TB 9-2320-280-35-10
21-8. Install upper half of antenna mount (14) on lower half of antenna mount (17) with four screws (15),
eight washers (5), four lockwashers (4), and nuts (3).
NOTE
Ensure holes of antenna base and grommets align with weldnut
holes in mounting bracket.
21-9. Install antenna (22) and gasket (21) on upper half of antenna mount (14) and secure with four screws (13),
lockwashers (24), and washers (23).
NOTE
Prior to securing antenna ground lead, enlarge hole on offset
mount with 9/32-in. drill bit to allow 1/4-in. screw to fit.
21-10. Secure antenna ground lead (19) to upper half of antenna mount (14) with screw (16), lockwasher
(18), and nut (20).
13
24
23
22
14
21
15
20
4
19
16
18
5
4
~
3
3.
NUT MS35690-610 QTY. 4
4.
LOCKWASHER MS35338-141 QTY. 4
5.
WASHER MS15795-814 QTY. 8
13.
CAPSCREW MS35307-365 QTY. 4
17
15.
SCREW MS90725-62 QTY. 4
16.
SCREW MS35027-263 QTY. 1
18.
LOCKWASHER MS45904-68 QTY. 2
20.
NUT MS35650-302 QTY. 1
21.
GASKET A3013655-1 QTY. 1
22.
ANTENNA A3017899-2 QTY. 1
23.
WASHER 2436163 QTY. 8
24.
LOCKWASHER MS45904-72 QTY. 4
Figure 5-53.
5-40
