TB 9-2320-280-35-9
7-5. Install grommet (13) in hole of rear wall (4).
7-6. Position antenna (14) and gasket (7) on antenna bracket (3) and route existing ground strap (9)
through antenna bracket (3).
7-7. Install antenna (14) on antenna bracket (3) with four capscrews (5), eight lockwashers (6), and four
nuts (8).
7-8. Install antenna bracket (3) on rear wall (4) with two capscrews (10), lockwashers (12), washers (15),
and nuts (16).
7-9. Remove old terminal lug, and install new terminal lug (11) on ground strap (9). Install ground
strap (9) and antenna bracket (3) on rear wall (4) with capscrew (10), lockwasher (12), washer (15),
and nut (16).
5
6
14
4
16
13
7
15
6
8
9
10
12
3
11
5.
CAPSCREW MS35307-365 QTY. 4
6.
LOCKWASHER MS45904-76 QTY. 8
9
7.
GASKET A3013655-1 QTY. 1
8.
NUT 13218E0320-293 QTY. 4
10.
CAPSCREW B1821BH031F125N QTY. 3
11
11.
TERMINAL LUG MS20659-108 QTY. 1
12.
LOCKWASHER MS45904-72 QTY. 3
13.
GROMMET 12338098 QTY. 1
14.
ANTENNA A3017899-2 QTY. 1
15.
WASHER 12338095 QTY. 3
16.
NUT 9418892 QTY. 3
Figure 5-18.
5-14
