TM 11-6130-225-40P-1
SECTION I
INTRODUCTION
assigned to indicate the levels of maintenance
1. Scope
authorized to USE and REPAIR support items. The
This manual lists repair parts and special tools required
maintenance codes are entered in the third and fourth
for performance of general support maintenance of the
positions of the Uniform SMR Code format as follows:
PP-2926AU.
(a) The maintenance code entered in the third
2. General
position will indicate the lowest maintenance level
This Repair Parts and Special Tools List is divided into
authorized to remove, replace, and use the support item.
the following sections:
a. Section II. Repair Parts List. A list of repair parts
The maintenance code entered in the third position will
indicate one of the following levels of maintenance:
authorized for use in the performance of maintenance.
The list also includes parts which must be removed for
Code
Application/Explanation
replacement of the authorized parts. Parts lists are
composed of functional groups in ascending numerical
H Support item is removed, replaced, used at the
sequence, with the parts in each group listed in figure
general support level.
and item number sequence.
(b) The maintenance code entered in the fourth
b. Section III. Special Tools List. Not applicable.
position indicates whether the item is to be repaired and
identifies the lowest maintenance level with the capability
c. Section IV: National Stock Number and Part
to perform complete repair (i.e., all authorized
Number Index. A list, in ascending National item
maintenance functions). This position will contain one of
the following maintenance codes:
identification number (NIIN, last 9 digits) sequence, of all
National stock numbers appearing in the listings,
Code
Application/Explanation
followed by a list, in alphanumeric sequence, of all part
numbers appearing in the listings.
National stock
Z Nonreparable. No repair is authorized.
number and part numbers are cross-referenced to each
(3) Recoverability code. Recoverability codes
illustration figure and item number appearance.
are assigned to support items to indicate the disposition
3. Explanation of Columns
action on unserviceable items. The recoverability code is
The following provides an explanation of columns found
entered in the fifth position of the Uniform SMR Code
in the tabular listings:
format as follows:
Recoverability
Codes
Definition
a .Illustration. This column is divided as follows:
(1) Figure number. Indicates the figure number
Z - Nonreparable item.
When unserviceable,
of the illustration in which the item is shown.
condemn and dispose at the level indicated in position 3.
(2) Item number. The number used to identify
c. National Stock Number. Indicates the National
each item called out in the illustration.
stock number assigned to the item and will be used for
requisitioning purposes.
b. Source, Maintenance and, and Recoverability
Codes (SMR).
d. Part Number. Indicates the primary number
(1) Source code. Source codes are assigned to
used by the manufacturer (individual, company, firm,
corporation, or Government activity), which controls the
support items to indicate the manner of acquiring support
design and characteristics of the item by means of its
items for maintenance, repair, or overhaul of end items.
engineering drawings, specifications standards, and
Source codes are entered in the first and second
inspection requirements, to identify an item or range of
positions of the Uniform SMR Code format as follows:
Code
Definition
items.
NOTE
PA--
Item procured and stocked for
When a stock numbered item is
anticipated or known usage.
requisitioned, the repair part received
XD-
A support item that is not stocked.
may have a different part number than
When required, item will be procured
the part being replaced
through normal supply channels
NOTE
e. Federal Supply Code for Manufacturer (FSC)W.
Cannibalization or salvage may be used
as a source of supply for any items
The FSCM is a 5digit numeric code listed in SB 70842
source coded above except those coded
which is used to identify the manufacturer, distributor, or
XA, XD, and aircraft support items as
Government agency, etc.
restricted by AR 700-4Z
(2) Maintenance code. Maintenance codes are
f Description. Indicates the Federal item name and,
if required, a minimum description to identify the item
1
