TM 9-6140-200-14
WARNING
DO NOT use metal or galvanized equipment when
draining electrolyte from Lead Acid batteries
CAUTION
Personnel MUST wear PPE while draining vented
batteries. Refer to Appendix C.
b. Draining:
(1) Drain batteries into a plastic bucket, and transfer the spent electrolyte into a
DOT specification 34 plastic drum, or any other DOT approved drum for
H2SO4.
(2) The exterior of all drained batteries should be rinsed with water and baking
soda to remove acid residue. Use care and avoid splashing. Allow
exteriors to dry. The exterior of all batteries must be completely dry prior to
packaging.
(3) The vent/filler caps should be replaced and taped in place after draining
and the vent holes sealed with the same tape.
------------------------------------------------------------------------------------------------------------
ITEM
NSN
SOS
------------------------------------------------------------------------------------------------------------
Pail, 12 quart, plastic
GO
Funnel, gallon, plastic
GO
Drum
S9G
Tape, Electrical, 3/4 inch
5970-00444-3167
GO
--------------------------------------------------------------------------------------------
E-5. Transportation Requirements
a. For LA battery casings, for packaging of drained battery casings for disposition
see your local servicing DRMO SOP.
E-2
