TB 9-2320-280-35-10
Section XIV. REAR SINCGARS MOUNT INSTALLATION
14-1. Locate, mark, and drill one 0.343-in. diameter hole (2) in lower shelf of multi-net rack (1).
1
3.00
1.50
2
Figure 5-31.
14-2. Using SINCGARS mounting base MT-6352/VRC as template, locate, mark, and drill four 0.343-in.
diameter holes (3) in lower shelf of multi-net rack (1).
14-3. Remove paint from vicinity of holes (3) and apply anti-seize compound as required.
3
Figure 5-32.
