TB 9-2320-280-35-10
29-7. Attach heat shrink tubing (11) and two terminal lugs (9) and (16) to power cable negative lead (15)
and power cable positive lead (12). (Refer to TM 9-2320-280-20 for terminal connector repair.)
29-8. Connect power cable positive lead (12) to 24V terminal board (18), located on cab enclosure
panel (19), with existing nut (10).
29-9. Connect power cable negative lead (15) to ground strap (17), located on cab enclosure panel (19),
with existing nut (14). Secure leads (12) and (15) together with tiedown strap (13).
9
10
11
19
12
13
~
18
17
14
16
11
15
9.
TERMINAL LUG 7728780 QTY. 1
11.
SHRINK TUBING MS23053/4-302-0 QTY. A/R
13.
TIEDOWN STRAP MS3367-1-0 QTY. A/R
16.
TERMINAL LUG 7728777 QTY. 1
Figure 5-91.
5-68
