TB 9-2320-280-35-10
Section XXVIII. EPLRS ANTENNA CABLE AND NTDR ANTENNA CABLE INSTALLATION
28-3. Route NTDR antenna cable (3) and EPLRS antenna cable (5) through hole in bracket (4) and
fiberglass body (8). Secure with clamp (7) and self-tapping screw (6).
28-4. Route cable to B-pillar (9). Secure with clamp (7) and self-tapping screw (6).
28-5. Route cable down B-pillar (9) to rear seatwell (11).
28-6. Route cable through rear seatwell (11) to C-beam (10).
28-7. Route cable along C-beam (10) to multi-net rack (16).
28-8. Route cable through hole in frame and through holes in side of multi-net rack (16).
28-9. Route EPLRS antenna cable (5) to vicinity of EPLRS mount (15).
28-10. Route NTDR antenna cable (3) to vicinity of NTDR mount (17).
28-11. Secure NTDR antenna cable (3) with three loop clamps (12), three screws (14), six washers (13),
and three nuts (18).
2
1
3
5
4
3. NTDR ANTENNA CABLE 8174914-7 QTY. 1
5. EPLRS ANTENNA CABLE SM-C-911480 QTY. 1
Figure 5-85.
7
6
5
3
8
6. SELF-TAPPING SCREW 9421073 QTY. 1
7. LOOP CLAMP MS21333-71 QTY. 1
Figure 5-86.
