TB 9-2320-280-35-10
31-38. Locate, mark, and drill one 0.390-in. diameter hole (68) in body (67) of vehicle and battery box (1).
31-39. Install shunt ground cable (80) on body (67) with screw (79), lockwasher (69), nut (70), washer (71),
and wingnut (72).
31-40. Route ground cable (80) to shunt (11).
31-41. Route cable (78) from shunt (11) to rear battery. Secure cables (78) and (80) with screw (79).
31-42. Route cable (81) from shunt (11) to terminal block. Secure cables (81) and (32) with screw (82).
31-43. Route cable (83) from solenoid (19) to negative terminal.
31-44. Route cable (77) from solenoid (19) to rear battery. Secure cables (77) and (83) with nut (76).
31-46. Route cable (84) from solenoid (19) to negative terminal.
31-47. Secure cable (84) to solenoid with nut (75).
1
~
69 68
67
70
71
72
69.
LOCKWASHER MS35338-46 QTY. 1
70.
NUT MS51967-9 QTY. 1
71.
WASHER 11500256 QTY. 1
72.
WINGNUT MS35425-75 QTY. 1
Figure 5-117.
5-90
