TB 9-2320-280-35-12
Section XLV. DRIVER-SIDE MULTI-NET RACK CABLE INSTALLATION
45-1. Locate two existing 0.281-in. diameter holes (8) in multi-net rack (6) support.
45-2. Locate, mark, and drill three 0.147-in. diameter holes (10) in multi-net frame (11).
45-3. Route two URO extension cables (5) and two EPLRS power cables (9) from multi-net rack (6)
support along multi-net frame (11) to curbside footwell.
45-4. Secure one EPLRS power cable (9) to multi-net rack (6) support with two clamps (2), screws (4),
lockwashers (3), and nuts (1).
45-5. Secure one EPLRS power cable (9) to multi-net frame (11) with three clamps (2) and screws (12).
45-6. Secure two URO extension cables (5) and remaining EPLRS power cable (9) to previously secured
EPLRS power cable (9) with tie straps (7).
3
4
5
6
1
2
9
7
8
1.
SCREW MS90725-6 QTY. 2
2.
LOOP CLAMP 3225T46 QTY. 4
3.
LOCKWASHER MS35338-44 QTY. 2
7.
TIE STRAP MS3367-1-0 QTY. A/R
Figure 5-129.
