TB 9-2320-280-35-9
13-6. Install resilient mount (12) on mounting plate (6) with four capscrews (11), eight lockwashers (10),
and four nuts (13).
13-7. Remove paint from vicinity of eight mounting holes (19) and (14) on left rear wheelwell (4). Apply
anti-seize compound as required. Position mounting plate (6) on left rear wheelwell (4) and align all
holes.
13-8. Install mounting plate (6) on left rear wheelwell (4) with four capscrews (9), lockwashers (17),
eight washers (18), four nuts (13), capscrews (11), eight lockwashers (10), four spacers (15), and
nuts (13).
13-9. Remove two capscrews (1), four washers (2), and two nuts (5) from positioning plate (3) and
wheelwell (4).
12
11
10
6
1
2
9
~
3
18
4
10
13
2
5
19
10
18
11
17
16
14
4
14
13
10
15
9.
CAPSCREW B1821BH025C125N QTY. 4
10.
LOCKWASHER MS45904-72 QTY. 16
11.
CAPSCREW B1821BH031C100N QTY. 8
12.
RESILIENT MOUNT MT-6146/VSQ-1 QTY. 1
13.
NUT 9417954 QTY. 8
15.
SPACER A3046313 QTY. 4
16.
NUT 9419143 QTY. 4
17.
LOCKWASHER MS35338-44 QTY. 4
18.
WASHER 2436161 QTY. 8
Figure 5-28.
5-23
