TB 9-2320-280-35-9
Section XIII. EPLRS MOUNTING BRACKET ON LEFT WHEELWELL INSTALLATION
NOTE
Procedure may require removal of left rear side rail, which may
require assistance. (Refer to TM 9-2320-280-20.)
Ground out any rivets on wheelwell that will interfere with
installation of EPLRS mounting plate.
13-1. Remove left rear side rail if necessary.
13-2. Install positioning plate (3) on wheelwell (4) with two capscrews (1), four washers (2), and
two nuts (5).
1
4
2
~
3
2
5
1.
CAPSCREW B182BH025C100N QTY. 2
2.
WASHER MS27183-10 QTY. 2
3.
PLATE, PLACEMENT A3046203 QTY. 1
5.
NUT MS51967-2 QTY. 2
Figure 5-26.
