TB 9-2320-280-35-9
Section XXX. ANTENNA CABLE INSTALLATION (WITH BOLT-ON ARMOR)
NOTE
Perform the following steps for vehicles with bolt-on armor and
antenna installed on left side of windshield frame.
For antenna cable installation without bolt-on armor, see
section XXII.
30-1. Route antenna cable (2) across A-pillar (6), below windshield (7) to right side of vehicle, and into
hole (8). Connect antenna cable (2) to antenna (1).
30-2. Remove two screws (5) from left capping ring (3).
30-3. Secure antenna cable (2) to left capping ring (3) with two clamps (4) and two existing screws (5).
1
2
3
~
4
5
4
~
8
7
5
6
2. ANTENNA CABLE A32551281W23 QTY. 1
4. CLAMP MS21333-96 QTY. 2
Figure 5-111.
Change 1
