TM 11-6140-203-14-4&P
(3) Wash in clean tap water.
on the bayonet end of the cell cap.
c. Tightening Terminal Studs.
(4) Replace by reversing process above.
b Removal of O-Ring Seals.
(1) Place the socket on torque wrench.
(1) With one hand, grasp the removed and on
(2) Insert the torque wrench into each terminal
the bayonet end of the cell cap. washed cell cap firmly.
stud and torque to 50 inch-pound (4 ft-lb).
c. Tightening Terminal Studs.
(2) With the other hand remove the O-ring
seal
4-7
