TB 11-6135-200-25
PPP-B-621, style 4, class 2; or PPP-B-585, style 2 or 3,
MIL-P-3938. Closure shall be in accordance with the
class 3. When the gross weight exceeds 200 pounds or
appendix to the applicable box specification. Reinforcing
the container length and width is 48 x 24 inches or more
shall be by nonmetallic strapping or pressure-sensitive
and the weight exceeds 100 pounds, 3 x 4 inch skids,
filament tape banding conforming to PPP-S-760, type II
laid flat, shall be applied in accordance with the
and PPP-T-97, type IV respectively; selection of the
requirements of the container specification or, if not
material and application shall be in accordance with the
specified, in a manner which will adequately support the
appendix of the applicable box specification.
item and facilitate the use of material handling
(3) Level C.
equipment.
Closure and strapping shall be in
accordance with the applicable container specification or
(a) Palletized load. A quantity of Battery BA-485A/U,
appendix thereto, except that the metal strapping shall
conform to QQS-781, type 1, class B.
packaged as specified in (1) (g) above except that the
fiberboard caps shall be class domestic.
(2) Level B.
(d) Less than palletized load. When quantities of Battery
(a) Palletized load. A quantity of Battery BA-485A/U,
BA-485A/U per destination are less than a pallet load, a
packaged as specified in (1) (a) through (/) above, shall
quantity of batteries, packaged as specified in (1) (a)
be palletized as specified in (1) (q) above.
through (/) above, shall be packed as specified in (2) (b)
above except that the fiberboard boxes shall conform to
(b) Less than palletized load. When quantities of Battery
PPP-B-640 and PPP-B-636, class I and class domestic,
respectively; and reinforcing shall not be required for
BA-485A/U per destination are less than a pallet load a
boxes conforming to PPP-B-636.
quantity of batteries, packaged as specified in (1) (a)
through (/) above, shall be placed within a close-fitting
(c) Marking. In addition to any special marking required
fiberboard box conforming to PPP-B-640, class 2, style
by the contractual document, unit packages and shipping
E; or PPP-B-636; type CF, class water-resistant, variety
containers shall be marked in accordance with MIL-STD-
DW. The gross weight of boxes conforming to PPPB-
129.
640 shall not exceed 250 pounds. When the gross
weight exceeds 200 pounds, or the container length and
b. Bill of Material. The bill of material is given in the
width is 48 x 24 inches or more and the weight exceeds
100 pounds, containers will be pallet mounted on pallets
chart below:
con TB 11-6135-200-25 forming to MIL-P-15011 or
Ref
Item
No
Method
Size (in.)
Requirements
No
Nomenclature
Reqd
MIL-
P-116
L
W
D
Spec No
*T
*C
*V
*G
*F
*S
1
Battery, Wet Primary
BA-485A/U
1
111
14
8 3/8
9
2
Cushioning material un-
compressed bound fiber 2
9 1/2
16 3/8
14
PPP-C-120
(Routed out)
3
Box, fiberboard
1
19 7/8
17
15
PPP-B-636
CF
WR SW V3c
*T-Type C-Class V-Variety G-Grade F-Flute S-Style
19
