TB 9-2320-280-35-10
intermediate (35), and rear (33) cargo bed supports. Secure with two self-tapping screws (15), loop
clamps (16), screw (20), loop clamp (13), nut (15), and existing self-tapping screw (18) and loop
clamp (34).
24-9. Route antenna cable (7) along taillight wiring harness with two existing loop clamps (27) and (26),
self-tapping screws (18), and lockwashers (25).
24-10. Route antenna cable (7) to antenna base (32) with existing loop clamp (19), nut (23), lockwasher (22),
washer (21), and screw (20).
24-11. Attach antenna cable (7) to antenna base (32).
24-12. Coil excess antenna cable (7) and secure to inside of taillight closeout cover with tiedown strap (24).
24-13. Attach cover plate (31) to offset antenna mount (28) with screws (29) and washers (30).
31
32
15
14
29 30
35
16
13
33 34
28
13
17
6
27
25
7
12
18
26
24
22
25
23
19
18
21
18
20
12.
SELF-TAPPING SCREW 9421073 QTY. 2
13.
LOOP CLAMP MS21333-69 QTY. 3
15.
NUT MS35650-302 QTY. 1
17.
SCREW MS35224-65 QTY. 1
24.
TIEDOWN STRAP MS3367-1-0 QTY. A/R
29.
SCREW MS90725-30 QTY. 4
30.
WASHER MS27183-12 QTY. 4
Figure 5-70.
5-52
