TB 9-2320-280-35-11
16-4. Secure antenna support (1) and angle plate (2) to right side of fiberglass body (7) with three screws (4)
and three nuts (6).
16-5. Using antenna support (1) as template, locate, mark, and drill two 0.406-in. diameter holes (8) on
fiberglass body (7).
1
8
9
7
2
4
8
6
4. SCREW MS90725-64 QTY. 3
6. NUT MS35690-610 QTY. 3
9. GROMMET MS21266-4N QTY. A/R
Figure 5-43.
Figure 5-42.
16-6. Install 4.250-in. piece of plastic-edge grommet (9) in hole of antenna bracket (10).
16-7. Secure angle plate (2) and antenna support (1) to right side of fiberglass body (7) with backing
plate (12), three screws (4), six washers (3), three lockwashers (5), and three nuts (6).
16-8. Secure antenna support (1) to right side of fiberglass body (7) with plate (11), two screws (4), four
washers (3), two lockwashers (5), and two nuts (6).
7
1
11
6
1
~
3
5
10
3
12
2
4
4
6
3
5
3
3.
WASHER MS15795-814 QTY. 10
9
4.
SCREW MS90725-64 QTY. 5
5.
LOCKWASHER MS35338-141 QTY. 5
6.
NUT MS35690-610 QTY. 5
11.
PLATE A3103784 QTY. 1
9. GROMMET MS21266-4N QTY. A/R
12.
BACKING PLATE A3046222 QTY. 1
Figure 5-44.
Figure 5-45.
5-30
