TB 9-2320-280-35-11
15-8. Install upper half of antenna mount (14) to lower half of antenna mount (17) with four screws (15),
eight washers (5), four lockwashers (4), and nuts (3).
NOTE
Ensure holes in antenna base and grommet are aligned with
weldnut holes in mounting bracket.
15-9. Install antenna (22) and gasket (21) on top of antenna offset mount (14) and secure with four screws (13),
lockwashers (24), and washers (23).
NOTE
Prior to securing antenna ground lead, enlarge hole on offset
mount with 9/32-in. drill bit to allow 1/4-in. screw to fit.
15-10. Secure antenna ground lead (19) to antenna offset mount (14) with screw (16), lockwasher (18), and
nut (20).
13
24
23
22
14
21
15
4
20
16
19
5
18
4
3
3.
NUT MS35690-610 QTY. 4
4.
LOCKWASHER MS35338-141 QTY. 4
17
5.
WASHER MS15795-814 QTY. 8
13.
CAPSCREW MS35307-365 QTY. 4
15.
SCREW MS90725-62 QTY. 4
16.
SCREW MS35207-263 QTY. 1
18.
LOCKWASHER MS45904-68 QTY. 2
20.
NUT MS35650-302 QTY. 1
21.
GASKET A3013655-1 QTY. 1
22.
ANTENNA A3017899-2 QTY. 1
23.
WASHER 2436163 QTY. 8
24.
LOCKWASHER MS45904-72 QTY. 4
Figure 5-38.
