TB 9-2320-280-35-11
16-9. Install upper half of antenna mount (17) to lower half of antenna mount (21) with four screws (23),
eight washers (3), four lockwashers (5), and nuts (6).
NOTE
Ensure holes in antenna base are aligned with weldnut holes in
mounting bracket.
four screws (13), four lockwashers (14), and four washers (15).
NOTE
Prior to securing antenna ground lead, enlarge hole on offset
mount with 9/32-in. drill bit to allow 1/4-in. screw to fit.
16-11. Secure antenna ground lead (19) to antenna offset mount (17) with screw (22), lockwasher (20), and
nut (18).
13
14
24
15
16
17
23
18
3
19
20
22
~
3
5
6
21
3.
WASHER MS15795-814 QTY. 8
16.
GASKET A3013655-1 QTY. 1
5.
LOCKWASHER MS35338-141 QTY. 4
18.
NUT MS35650-302 QTY. 1
6.
NUT MS35690-610 QTY. 4
20.
LOCKWASHER MS45904-68 QTY. 2
13.
CAPSCREW MS35307-365 QTY. 4
22.
SCREW MS35207-263 QTY. 1
14.
LOCKWASHER MS45904-72 QTY. 4
23.
SCREW MS90725-62 QTY. 4
15.
WASHER 2436163 QTY. 8
24.
ANTENNA A3017899-2 QTY. 1
Figure 5-46.
