TB 9-2320-280-35-11
26-14. Route antenna cable (5) along existing taillight wiring harness (43) on rear cargo bed support (32)
and secure with four existing loop clamps (44), (45), (46), (47), and existing self-tapping screws (39).
26-15. Route antenna cable (5) along existing taillight wiring harness on left-side frame rail with three
existing loop clamps (42), (41), (47), and existing self-tapping screws (39) and lockwashers (40).
26-16. Route antenna cable (5) to antenna base (35) with existing loop clamp (36), screw (52),
lockwasher (37), and nut (38).
26-17. Attach antenna cable (5) to antenna base (35).
26-18. Coil excess antenna cable (5) and secure to inside of taillight closeout cover with tiedown
strap (48).
26-19. Attach cover plate (49) to offset antenna mount (53), with four screws (50) and four washers (51).
36
38
37
40
41
39
43
45
35
42
46
44
52
53
51
32
49
50
5
48
47
40
47
39
48. TIEDOWN STRAP MS3367-1-0 QTY. A/R
50. SCREW MS90725-30 QTY. 4
51. WASHER MS27183-12 QTY. 4
Figure 5-69.
5-50
