TB 9-2320-280-35-11
intermediate (34), and rear (32) cargo bed supports. Secure with two self-tapping screws (12), loop
clamps (11), screw (16), loop clamp (11), nut (14), and existing self-tapping screw (17) and loop
clamp (33).
26-9. Route antenna cable (1) along taillight wiring harness with two existing loop clamps (26) and (25),
self-tapping screws (17), and lockwashers (24).
26-10. Route antenna cable (1) to antenna base (31) with existing loop clamp (18), nut (22), lockwasher (21),
washer (20), and screw (19).
26-11. Attach antenna cable (1) to antenna base (31).
26-12. Coil excess antenna cable (1) and secure to inside of taillight closeout cover with tiedown strap (23).
26-13. Attach cover plate (30) to offset antenna mount (27) with four screws (28) and four washers (29).
30
31
14
13
28 29
34
15
11
32 33
11
27
5
16
26
24
1
12
17
25
23
21
24
22
18
17
20
17
19
11.
LOOP CLAMP MS21333-69 QTY. 3
12.
SELF-TAPPING SCREW 9421073 QTY. 2
14.
NUT MS35650-302 QTY. 1
16.
SCREW MS35224-65 QTY. 1
23.
TIEDOWN STRAP MS3367-1-0 QTY. A/R
28.
SCREW MS90725-30 QTY. 4
29.
WASHER MS27183-12 QTY. 4
Figure 5-68.
5-49
