TB 9-2320-280-35-11
Section XXVIII. PLGR ANTENNA AND CABLE INSTALLATION (WITHOUT BOLT-ON ARMOR)
28-1. Remove two plugs (1) from outer right-side windshield frame (3).
NOTE
Drilled holes on inside and outside of windshield frame should
align to allow routing of PLGR cable through windshield frame.
28-2. Locate, mark, and drill 0.375-in. diameter hole (2) in outer right-side windshield
frame (3).
3
2
1
0.75
3.00
Figure 5-71.
28-3. Locate, mark, and drill 0.375-in. diameter hole (4) in inner right-side windshield frame (5).
4
1.25
~
5
5.12
Figure 5-72.
Change 1
