TB 9-2320-280-35-12
2-2. Locate, mark, and drill three 0.156-in. diameter holes (3).
2-3. Locate, mark, and drill one 1.325-in. diameter hole (5) in cab enclosure panel (7).
2-4. Locate, mark, and drill one 1.125-in. diameter hole (4) in cab enclosure panel (7).
2-5. Install grommet material (6) in holes (4) and (5).
3
3.250
1.625
3
2.50
3
4.00
5.50
4.00
Figure 5-2.
1.50
5
6
4
2.20
1.07
2.50
7
6. GROMMET MATERIAL MS21266-4N QTY. A/R
Figure 5-3.
5-2
