TB 9-2320-280-35-12
2-12. Using terminal strips (16) and (13) as templates locate, mark, and drill eight 0.201-in. diameter
holes (20) in battery box (2) rear wall.
2-13. Secure one 8-position terminal strip (13) and one 6-position terminal strip (16) to battery box (2)
rear wall with eight bolts (14), washers (15), lockwashers (17), and nuts (18).
2-14. Using shunt assembly (19) as template, locate, mark, and drill two .201-in. diameter holes (21) in
battery box (2) rear wall.
2-15. Secure shunt assembly (19) to battery box (2) rear wall with two bolts (14), two washers (15),
16
17
18
1.66
1.00
4.25
1.66
20
15
2.25
1.125
14
21
19
18
15
~
14
13
17
2
13.
TERMINAL STRIP (8-POLE) 7527K28 QTY. 1
14.
SCREW MS35207-267 QTY. 10
15.
WASHER MS27183-8 QTY. 10
16.
TERMINAL STRIP (6-POLE) 7527K26 QTY. 1
17.
LOCKWASHER MS45904-60 QTY. 10
18.
NUT MS35650-302 QTY. 10
19.
SHUNT ASSEMBLY PKMM-000-013 QTY. 1
Figure 5-6.
5-5