TB 9-2320-280-35-12
Section III. INTEGRATED RACK INSTALLATION
3-1. Remove two inserts (2) from bottom of integrated rack (1).
2
1
Figure 5-8.
3-2. Using integrated rack (1) as template, locate, mark, and drill one 0.390-inch diameter hole (4) in
dash (6).
3-3. Remove paint from vicinity of hole (4) and two existing inserts (5).
3-4. Install insert (3) in hole (4).
3-5. Apply anti-seize compound to vicinity of inserts (3) and (5) as required.
5
6
4
3
3. INSERT 12446871-2 QTY. 1
Figure 5-9.
