TB 9-2320-280-35-12
NOTE
Assemble shelves to supports with holes designated "A" facing in
same direction.
15-9. Install two shelves (21) on supports (22) with sixteen screws (20), thirty-two lockwashers (19), and
sixteen locknuts (23). Do not tighten locknuts (23) at this time.
15-10. Install two braces (28) on shelves (21) with two screws (20), screws (25), lockwashers (19), washers
(26), locknuts (23), and locknuts (24). Do not tighten locknuts at this time.
15-11. Install center support (27) on shelves (21) with four screws (20), lockwashers (19), and locknuts (23).
Do not tighten locknuts (23) at this time.
20
19
19
20
20 19
20
20
19
19
21
23
28
25
26
20
22
~
19
21
23
20
23
23
19
27
23
23
24
19.
LOCKWASHER MS45904-72 QTY. 22
20.
SCREW MS90726-36 QTY. 22
21.
SHELF, ELECTRICAL A3046236 QTY. 2
22.
SUPPORT, RADIO RACK A3046235 QTY. 2
23.
NUT MS51967-5 QTY. 22
24.
NUT MS51967-2 QTY. 2
25.
SCREW MS90725-8 QTY. 2
26.
WASHER 2436161 QTY. 2
27.
CENTER SUPPORT A3265621 QTY. 1
28.
BRACE, ANGLE A3046237 QTY. 2
Figure 5-35.
5-27
