TB 9-2320-280-35-12
28-3. Install 4.250-in. piece of plastic-edge grommet (9) in existing hole (8) of right-side rear wheelhouse (7).
28-4. Temporarily secure antenna support (1) and angle plate (2) to right-side rear wheelhouse (7) with three
screws (4) and three nuts (6).
28-5. Using antenna support (1) as template, locate, mark, and drill two 0.406-in. diameter holes (10) in
right-side rear wheelhouse (7).
28-6. Remove antenna support (1) and angle plate (2) from right-side rear wheelhouse (7).
1
8
9
7
2
4
10
6
4. SCREW MS90725-64 QTY. 3
6. NUT MS35690-610 QTY. 3
9. GROMMET MS21266-4N QTY. A/R
Figure 5-75.
Figure 5-74.
28-7. Install 4.250-in. piece of plastic-edge grommet (9) in hole (11) of antenna support (1).
plate (13), three screws (4), six washers (3), three lockwashers (5), and three nuts (6).
28-9. Secure antenna support (1) to right-side rear wheelhouse (7) with plate (12), two screws (4), four
washers (3), two lockwashers (5), and two nuts (6).
7
1
12
6
1
~
3
5
11
3
13
2
4
4
6
3
5
3
3.
WASHER MS15795-814 QTY. 10
9
4.
SCREW MS90725-64 QTY. 2
5.
LOCKWASHER MS35338-141 QTY. 5
6.
NUT MS35690-610 QTY. 2
12.
PLATE A3103784 QTY. 1
9. GROMMET MS21266-4N QTY. A/R
13.
BACKING PLATE A3046222 QTY. 1
Figure 5-76.
Figure 5-77.
5-52
