TB 9-2320-280-35-12
28-10. Install upper half of antenna offset mount (18) to antenna support (1) with four screws (23), eight
washers (3), four lockwashers (5), and four nuts (6).
NOTE
Ensure holes in antenna base are aligned with weldnut holes in
mounting bracket.
four screws (14), lockwashers (15), and washers (16).
NOTE
Prior to securing antenna ground lead, enlarge hole on offset
mount with 9/32-in. drill bit to allow 1/4-in. screw to fit.
28-12. Secure antenna ground lead (20) to antenna offset mount (18) with screw (22), two
lockwashers (21), and nut (19).
14
15
24
16
17
18
21
19
23
3
20
21
22
~
3
5
6
1
3.
WASHER MS15795-814 QTY. 8
18.
OFFSET MOUNT A3046219 QTY. 1
5.
LOCKWASHER MS35338-141 QTY. 4
19.
NUT MS35650-302 QTY. 1
6.
NUT MS35690-610 QTY. 4
21.
LOCKWASHER MS45904-68 QTY. 2
14.
CAPSCREW MS35307-365 QTY. 4
22.
SCREW MS35207-263 QTY. 1
15.
LOCKWASHER MS45904-72 QTY. 4
23.
SCREW MS90725-62 QTY. 4
16.
WASHER 2436163 QTY. 8
24.
ANTENNA A3017899-2 QTY. 1
17.
GASKET A3013655-1 QTY. 1
Figure 5-78.
