TB 9-2320-280-35-12
30-2. Using QEAM rack (4) as template, locate, mark, and drill four 0.344-in. diameter holes (9) in roof of
vehicle (14).
30-3. Mark location for four QEAM spacers (8) and apply RTV sealant to marked areas (10).
NOTE
Allow RTV to cure for 30 minutes.
30-4. Press four spacers (8) onto roof of vehicle (14).
30-5. Position QEAM rack (4) over holes in four spacers (8).
30-6. Apply RTV to four bolt holes (9) and insert four bolts (6) and washers (7) into QEAM carrier.
30-7. Apply RTV to one side of four washers (11). Press washers (11) in place.
30-8. Install lockwasher (12) and nut (13).
6
7
4
~
8
9
10
11
12
13
14
6.
SCREW B1821BH031C300N QTY. 4
7.
WASHER 120393 QTY. 4
8.
QEAM SPACER (PART OF A3265715) QTY. 4
11.
WASHER 120393 QTY. 4
12.
LOCKWASHER MS45904-72 QTY. 4
13.
NUT MS51967-6 QTY. 4
Figure 5-83.
5-57
