TB 9-2320-280-35-9
NOTE
It may be necessary to drill four 0.147-in. holes in right wheelwell/
utility area before performing step 20-6.
20-6. Route antenna cables (7) and (1) and power cable (2) along right rear seat/utility area with four
self-tapping screws (12) and loop clamps (13).
20-7. Route two antenna cables (7) and (1) through right wheelwell/utility area with existing grommet,
retainer, screws, and plain-assembled nuts. (Refer to TM 9-2320-280-20.)
12
13
7
2
1
1
7
2
13
12. SELF-TAPPING SCREW 9421073 QTY. 4
13. LOOP CLAMP MS21333-69 QTY. 4
Figure 5-51.
5-43
