TB 9-2320-280-35-9
Section XXVI. C4ISR POWER CABLES INSTALLATION
NOTE
Use aluminum flat bar as template to locate and mark hole
position.
Use No. 30 drill bit to drill holes in battery box.
26-1. Drill five 0.129-in. to 0.133-in. diameter holes (4) in lip of battery box (3).
26-2. Install rubber sheet (1) and aluminum flat bar (5) on battery box (3) with four rivets (2).
1
2
5
3
4
1. RUBBER SHEET 03A016D-1 QTY. 1
2. RIVET AB4-5A QTY. 5
5. ALUMINUM FLAT BAR 03A016D-2 QTY. 1
Figure 5-74.
