TM 1141-361-14-14
(2) Grasp the flange of the indicator lamp
(5) Install the lens and lamp; the the lens
clockwise until it is screwed onto the indicator
with fingernails and pull the indicator lamp out
-
light socket
from the lens.
b. Replacement of
Plug
Connector
(3) Insert the new indicator lamp into the
P60001. Replacement of plug connector P8001 is
lens.
power cable wires and removing the wire. The
(4) Install the O-ring over the threaded
wires are then secured to their respective pins on
portion of the indicator light socket. Replace the
the replacement connector.
Wing if damaged.
Figure 3-1. Battery charger component locations, front panel
3-4