TM5-6130-301-13&P
(3) Replace worn out or damaged gasket,
c. Distribution panel repair.
(1) Replace distribution panel by removing seven phillips head screws, and nuts from hinge.
(2) Repair distribution panel by straightening with a plastic mallet to remove dents. If necessary, arc weld
in accordance with MIL-W-45205, class B, Welding, Inert-Gas, Metal-Arc Aluminum Alloys.
d. Receptacle repair.
(1) Refer to figure 5-6 and repair broken or damaged wires by splicing or replacing.
(2) Replace damaged or broken receptacles.
e. Wiring repair.
(1) Refer to figures 5-7 and 5-8 of broken or damaged wires by splicing or replacing wires.
(2) Replace broken or damaged terminals.
