TB 11-6135-200-25
c. Defect Classification.
(j) Marking of quantity of items in package omitted,
incorrect, or illegible.
(1) Mechanical-Visual.
(a) Critical. Refer to the definition of a critical defect.
(k) Different stock numbered items in the same unit
package.
(b) Major.
(4) Packaging and marking, minor.
1. Damage due to handling or storage (crushed,
(a) Item not properly blocked or braced within the unit
deformed, or broken).
package to prevent movement.
2. Soldering: defects as listed in MILSTD-252D.
(b) Packaging material damaged.
3. Solderless connectors: defects as listed in MIL-STD-
(c) Conforming or cushioning wraps are not snug fitting
252B.
and contain voids.
4. Cabling and wiring: defects as listed in MILSTD-252B.
(d) Air not expelled from barrier prior to sealing.
5. Hardware: defects as listed in MILSTD-252B.
(e) Any item of marking information other than (3) (h),
6. Foreign objects: defects as listed in MILSTD-252B.
(i), and (/) above listed under major defects omitted,
7. Potential short circuits: defects as listed in MIL-STD-
incorrect, or illegible.
252B.
(5) Packing and marking, major.
8. Finish: defects as listed in MIL-STD-252B.
(a) Use of improper or defective material.
9. Marking: defects as listed in MIL-STD-252B.
(b) Quantity in pack not as specified.
10. Parts: defects as listed in MIL-STD-252B.
(c) Gross weight in excess of specified amount.
11. Contacts: defects as listed in MILSTD-252B.
(d) Box closure not as specified.
12. Plating, painting or MFP missing.
(e) Type, grade, class, and style of the shipping
13. Dimensional: a dimensional defect which directly
container not as specified.
affects interchangeability, assembly or operation.
(f) Strapping omitted (when required).
(c.) Minor.
(g) Strapping inadequate or incorrectly applied (when
1. Soldering: defects as listed in MILSTD-252B.
required).
2. Solderless connectors: defects as listed in MIL-STD-
(h)
Items not adequately blocked, bracketed, or
252B.
cushioned within the shipping container to prevent
3. Cabling and wiring: defects as listed in MILSTD-252B.
movement or damage.
4. Hardware: defects as listed in MILSTD-252B.
(i) Shipping documents or packing list omitted.
5. Finish: defects as listed in MIL-STD-252B.
(j) Stock number omitted, incorrect, or illegible.
6. Marking: defects as listed in MIL-STD-252B.
(k) Nomenclature omitted, incorrect, or illegible.
7. Parts: defects as listed in MIL-STD-252B.
(I) Marking of quantities of items in pack omitted,
8. Contacts: defects as listed in MIL-STD-252B.
incorrect, or illegible.
(2) Electrical.
(m) Destination marking omitted, incorrect, or illegible.
(a) Critical. Refer to the definition of a critical defect.
(n) Special marking or labeling (when required) omitted,
(b) Major. Any electrical defect, other than critical, that
incorrect, or illegible.
does not meet the requirements specified for each item
(o) Overseas code marking (when required) omitted,
shall be considered a major defect.
incorrect, or illegible.
(c) Minor. None. All electrical defects shall be
(6) Packing and marking, minor.
considered critical or major, as applicable.
(a) Unsealed carton.
(3) Packaging and marking, major.
(b) Defective taping or sealing of carton.
(a) Use of improper or defective material.
(c) Any other box defect which may be considered minor
(b) Quantity in unit package not as specified.
by definition of MIL-STD-105.
(c) Incorrect packaging method applied.
(d) Any item or required marking information other than
(d) Cushioning or padding omitted.
(5) (U) through (o) above listed tinder major defect
(e) Cushioning or padding inadequate for the protection
omitted, incorrect or illegible.
of the barrier material from projections, sharp edges, or
f. Calibration of Measuring and Testing Equipment.
other similar features of the item.
All measuring and test equipment shall have been
(f)
Cushioning inadequate for the physical and
calibrated and certified within its prescribed period, in
mechanical protection of the item.
accordance with TB 750-236 before use. Certification
(g) Unsealed, punctured, or improperly sealed barrier
shall be affixed in such a way as to preclude any altering
bag, wrap, or envelope.
or tampering.
(h) Stock number omitted, incorrect, or illegible.
(i) Nomenclature omitted, incorrect, or illegible.
33
