TB 11-6135-200-25
(b) Palletized load. A quantity of containers, packed as
packaged as specified in (a) through (d) above, shall be
specified in (1) (e) above shall be palletized as specified
packed within a close-fitting fiberboard box conforming to
in (I) (f) above.
PPP-B-636, type CF, class weatherresistant.
Box
(c) Less than palletize load. When quantities per
closures shall be as specified in the appendix of the box
destination are less than a pallet load, the containers
specification. To facilitate palletization, fiberboard boxes
packed as specified in (I) (e) above shall be reinforced
shall be uniform in size and contain equal quantities of
by pressure-sensitive filiament tape conforming to PPPT-
the packaged items.
97, type IV as specified in the appendix to the box
(f) Palletized load. A quantity of containers, packed as
specification. No further packing shall be required.
specified in paragraph 5.2.1.1 of PPP-B-636 shall be
(3) Level C.
placed on a pallet, load type 1, conforming to MILSTD-
147. A fiberboard cap shall be employed over the load
(a)
Each Battery BA-618/U shall be packaged in
having two sides extending down the stacked load at
least 12 inches to accommodate marking requirements.
accordance with item 1 through 4 of the chart below and
The cap shall be fabricated of fiberboard conforming to
figure 7-1.
PPP-F-320, class weather-resistant, W5s or V3c. The
load shall be bonded to the pallet by strapping.
packaged as specified in (I) (a) through (d) above, shall
(g) Less than palletized load. When quantities per
be packed as specified in (1) (e) above, except that the
destination are less than a pallet load, the containers
fiberboard boxes shall be class domestic.
(c) Palletized load. A quantity of containers, packed as
packed in (e) above shall be waterproofed, with tape
conforming to PPP-T-76, in accordance with the taping
specified in (b) above shall be palletized as specified in
requirements of the appendix of the box specification. A
(1) (1) above, except that the fiberboard shall be
quantity of the waterproofed containers shall be placed
domestic.
within a close-fitting box conforming to PPP-B-601,
(d) Less than palletized load. When quantities per
overseas type; PPP-B-621, type 4, class 2, or PPP-B-
destination are less than a pallet load, the containers
585, style 2 or 3, class 3. When the gross weight
packed as specified in (b) above shall be used as the
exceeds 200 pounds, or the container length and width is
shipping container. No further packing shall be required.
48 x 24 inches or more and the weight exceeds 100
(4) Packing. Packing shall be level A, B, or C as
pounds, 3 x 4 inch skids, laid flat, shall be applied in
specified. Shipping containers for all levels shall be
accordance with the requirements of the container
capable of stacking and supporting superimposed loads
specification, or if not specified in a manner which will
during shipment and storage without damaging the
adequately support the item and facilitate the use of
container or its contents.
material handling equipment. Closure and strapping
(5) Marking. In addition to any special marking required
shall be in accordance with the applicable container
by the contractural document, unit packages,
specification or appendix thereto except that metal
intermediate containers, and shipping containers shall be
strapping shall conform to QQ-S-781, type 1, class B.
marked in accordance with MIL-STD-129. The date of
(2) Level B.
manufacture shall also be shown on the unit package
only, it shall be shown in code.
packaged as specified in (I) (a) through (d) above, shall
b. Bill of Material. The bill of material for BA-618/U
be packed as specified in (1) (e) above.
is given in the chart below:
Ref
Item
No
Method
Size (in.)
Requirements
No
Nomenclature
Reqd
MIL-
P-116
L
W
D
Spec No
*T
*C
*V
*G
*F
*S
1
Battery, Thermal
Dia
BA-618A/U
1
IC-4
3
4
Dia
2
Fiberboard Sleeve
1
1
X1
MIL-C-3955
3
Fiberboard Tube
1
MIL-C-3955
11
1
B
B
4
Pressure-Sensitive Tape 1
PPP-T-76
*T-TypeC-Class V-Variety G-Grade F-Flute S-Style
29