TB 9-2320-280-35-11
Section XXXIII. EPLRS ON WHEELWELL ANTENNA CABLE INSTALLATION
33-3. Route cable (5) to B-pillar (8). Secure with clamp (6) and self-tapping screw (7).
33-4. Route cable (5) down B-pillar (8), through cab enclosure panel (12) to rear seat well (13).
33-5. Route cable (5) through rear seat well (13) and around battery box (11) to C-beam (10).
33-6. Locate, mark, and drill one 0.147-in. diameter hole (17) in side of wheelwell (9).
33-7. Locate, mark, and drill one 0.147-in. diameter hole (18) in top of wheelwell (9).
33-8. Route cable (5) up right wheel well (9) to vicinity of EPLRS mount (14). Secure with clamps (16)
and self-tapping screws (15).
2
1
3
5
~
4
4. EPLRS ANTENNA CABLE SM-C-911480 QTY. 1
Figure 5-90.
7
5
6
8
6. LOOP CLAMP MS21333-71 QTY. 1
7. SELF-TAPPING SCREW 9421073 QTY. 1
Figure 5-91.
