TB 9-2320-280-35-11
NOTE
Buss bar attachment is for one EPLRS unit. Procedure for other
two units is similiar.
34-11. Attach shrink tubing (25) and two terminal lugs (23) and (29) to power cable negative lead (28) and
power cable positive lead (26). (Refer to TM 9-2320-280-20 for terminal connector repair.)
34-12. Connect power cable positive lead (26) to 24V terminal board (31), located on cab
enclosure panel (32), with existing nut (24).
34-13. Connect power cable negative lead (28) to ground strap (30), located on cab enclosure panel (32),
with existing nut (24). Secure leads together with tiedown strap (27).
23
24
26
25
32
27
~
31
30
24
28
29
25
23. TERMINAL LUG 7728780 QTY. 1
25. SHRINK TUBING MS23053/4-302-0 QTY. A/R
27. TIEDOWN STRAP MS3367-1-0 QTY. A/R
29. TERMINAL LUG 7728777 QTY. 1
Figure 5-98.
5-72
