TB 9-2320-280-35-11
Section XXXV. C4ISR POWER CABLES INSTALLATION
35-1. Locate, mark, and drill one 0.125-in. diameter hole (2) in rear battery box (1).
1
6.00
5.75
2
Figure 5-101.
35-2. Using terminal block as template, locate, mark, and drill two 0.125-in. diameter holes (3) in rear
battery box (1).
35-3. Install terminal block (7) in battery box (1) with three screws (5), washers (6), and locknuts (4).
4
3
~
6
7
5
1
4.
LOCKNUT (4-40) MS21044-NO4 QTY. 3
5.
SCREW MS35206-217 QTY. 3
6.
WASHER MS27183-4 QTY. 3
7.
TERMINAL BLOCK MS27212-1-23 QTY. 1
Figure 5-102.