TB 9-2320-280-35-9
19-2. Remove windshield wiper from right-side windshield frame. (Refer to TM 9-2320-280-20-3.)
19-3. Position cutout of QEAM rack (12) centered on windshield wiper pivot (8).
19-4. Using QEAM rack (12) as template, locate, mark, and drill four 0.250-in. diameter holes in
right-side windshield frame (6). Remove QEAM rack (12).
19-5. Enlarge four holes drilled in step 19-4 to 0.391-in. diameter.
19-6. Install four inserts (11).
19-7. Draw centerline on top and bottom of C-beam (14).
19-8. Using QEAM rack (12) as template, locate and mark hole position (13) on top of C-beam (14).
12
13 15
13 15
14
0.50
Figure 5-44.
5-37
