TB 9-2320-280-35-9
Section XVII. POWER ENTRY BOX INSTALLATION
17-1. Locate, mark, and drill one 0.188-in. diameter hole (4) in right wheelwell (5).
17-2. Using power entry box (7) as template, locate, mark, and drill three 0.188-in. diameter holes (3) in
right wheelwell (5).
17-3. Install power entry box (7) on right wheelwell (5) with four capscrews (1), eight washers (2), and
four locknuts (6).
1
2
7
3
4
5
5.75
~
24.31
2
6
1.
SCREW MS35207-265 QTY. 4
2.
WASHER MS27183-8 QTY. 8
6.
NUT MS35650-302 QTY. 4
7.
POWER ENTRY BOX 03A0108D QTY. 1
Figure 5-39.
