TM 11-6130-236-12
1-6. Description of
Charger, Battery
Maximum current
PP-1451/G
(NORMAL
CHARGE switch
(fig. 1-1)
in CHARGE
The battery charger is a self-contained unit
80 amperes for 28-volt
position)
in a metal cabinet, 23 inches high, 22 inches
o p e r a t i o n or 40 am-
wide, and 22 inches deep. Operating controls
peres for 56-volt op-
and indicators are mounted on the front panel
eration.
that is recessed. A hinged front panel protec-
tion plate secured with quick-release fasteners
Maximum current
is provided to completely cover the recessed
(NORMAL
front panel. Two carrying handles are mounted
CHARGE switch
on each side of the battery charger. The base
in NORMAL
50 amperes for 28-volt
of the battery charger is shock mounted on two
position)
o p e r a t i o n or 25 am-
skids. Directly behind the front panel plate
peres for 56-volt op-
that is secured with quick-release fasteners is
eration.
The front chassis assembly panel contains the
1.5 percent (root mean
Ripple voltage
l i n k s , fuses, connectors, terminals, and a
square).
switch. An ac power connector is provided on
Voltage regulation
the rear panel of the battery charger. Venting
(NORMAL-
is provided by air louvers on both sides, rear,
CHARGE switch
and on top of the equipment. A small grom-
in NORMAL
meted hole below the ac power connector is
1.5 percent.
position)
provided for a cable (not supplied) to connect
Ambient operating
the dc output of the battery charger to the
temperature
equipment being powered. The battery charger
-40 F (-40 C) to
range
weighs 285 pounds and includes one cable as-
+ 1 3 2 F (+56 C).
sembly (FSN 5995-906-1124) to connect the
battery charger to the ac source, five spare 30-
ampere fuses (FSN 5920-050-4962), five spare
-ampere fuses (FSN 5920-043-2641), one
spare indicator lamp (FSN 6240-155-8706),
and two technical manuals.