TM 11-6130-392-34
Table 4-4. Performance Test Procedures-Continued
Column 3
Column 2
Column 1
Reference, or Instruction
Acceptable TEST RESULT
Test Procedure
Go to step (17)
All tests were passed.
(16) If performance tests are now com-
pleted, turn POWER switch to OFF.
Remove power cable from 115 VAC
source. Remove band from interlock
switch and remove clip leads from
REMOTE BATTERY jacks. Assem-
ble retainer and cover set controls
per para 3-10e. Refer to figure 3-1.
POWER ON lamp lights.
(17) Connect power cable to 115 VAC. Set
POWER switch to ON.
(18) Set POWER OFF, disconnect power
cable, return battery charger to serv-
ice.
4-27
--
